Westermo RedFox Series - Manual (Page 450)

Westermo OS Management Guide
Version 4.17.0-0
Default values (empty)
20.2.5 Set System Time Zone
Syntax [no] timezone <TIMEZONE>
Context General System Configuration context.
Usage Set system time zone string.
Note
For information of available time zone settings, see section 20.2.8 .
”no timezone” resets the timezone to its default value (Etc/UTC).
Use ”show timezone” to view the configured timezone setting.
Default values Etc/UTC
20.2.6 CPU bandwidth limitation
Syntax [no] cpu-bandwidth-limit <auto|<64-1000000>|<7700-1488000> fps>
Context General System Configuration context
Usage Limit the traffic sent to the CPU in kbit/s or frames per second (traffic
from the CPU is not affected). It is also possible use ISO modifiers k/M/G,
e.g., 256k or 10M as specifiers for kbps and Mbps.
Note
CPU bandwidth limit in frames per second mode is available on all
WeOS products, with exceptions for some RedFox models. On Red-
Fox, the frames per second mode is available for products based on
the ”Corazon” platform, including RedFox Industrial Rack, newer Red-
Fox Rail (RFR-212-FB)[
50 ] and newer RedFox Industrial[ 48 ]. But the
frames per second mode is not available on RedFox products based on
the (older) ”Atlas” platform, i.e, RedFox Industrial listed in [
47 ] or older
RedFox Rail (RFR-12-FB).
Set values are rounded off to the nearest possible HW setting.
450 ➞ 2015 Westermo Teleindustri AB