Westermo RedFox Series - Manual (Page 958)

Westermo OS Management Guide
Version 4.17.0-0
41.3.3 Setting listen interface and port
Syntax [no] listen <any|IFNAME>[:PORT]
Context Microlok Gateway Configuration context
Usage Setting local interface and UDP port to listen to, e.g., ”listen vlan1:45678”
to listen on interface vlan1 and UDP port 45678. Keyword ”any” can be used
to listen on all interfaces.
Acceptable port range is <1-65335>, where default port number is 60000.
Use ”no listen” to reset to default settings (listen on any interface, UDP
port 60000).
Use ”show listen” to list the current setting.
Default values Any interface, UDP port 60000.
41.3.4 Setting key-on-delay
Syntax [no] key-on-delay <MILLISECONDS>
Context Microlok Gateway Configuration context
Usage Set Key-On signal delay in milliseconds, e.g., ”key-on-delay 100”. Al-
lowed range is <1-1000> (milliseconds). Use ”no key-on-delay” or
”key-on-delay 0” to disable this function.
Use ”show key-on-delay” to list the current Key-On signal delay setting.
Default values Disabled (0)
41.3.5 Setting key-off-delay
Syntax [no] key-off-delay <MILLISECONDS>
Context Microlok Gateway Configuration context
Usage Set Key-Off signal delay in milliseconds, e.g. key-off-delay 100. Allowed
range is <1-1000> (milliseconds). Use ”no key-off-delay” or
”key-off-delay 0” to disable this function.
Use ”show key-off-delay” to list the current Key-Off signal delay setting.
958 ➞ 2015 Westermo Teleindustri AB