Westermo RedFox Series - Manual (Page 820)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Command Default Section
[no] remote-subnet <SUBNET/LEN | Auto Section 35.3.20
SUBNET NETMASK> [shared]
[no] local-protocol <PROTO> Disabled Section 35.3.21
[port <PORT>]
[no] remote-protocol <PROTO> Disabled Section 35.3.22
[port <PORT>]
[no] initiator Responder Section 35.3.23
[no] dpd-action <clear|hold|restart> Clear/Restart Section 35.3.24
[no] dpd-delay <SECONDS> 30 Section 35.3.25
[no] dpd-timeout <SECONDS> 120 Section 35.3.26
[no] ike-lifetime <SECONDS[s]|. . . > 1h Section 35.3.27
[no] sa-lifetime <SECONDS[s]|. . . > 8h Section 35.3.28
Show VPN Status
show tunnel ipsec [ID]
Section 35.3.29
35.3.1 Managing Tunnels
Syntax tunnel
Context Global Configuration context
Usage Use the ”tunnel” command to enter the Tunnel Configuration context.
Use ”show tunnel” to list configured VPN tunnels (also available as ”show”
command within the
Tunnel Configuration context.
Default values Not applicable.
35.3.2 Enable/disable IPsec NAT Traversal
Syntax [no] ipsec-nat-traversal
Context Tunnel Configuration context
820 ➞ 2015 Westermo Teleindustri AB