Westermo RedFox Series - Manual (Page 87)

Westermo OS Management Guide
Version 4.17.0-0
(b) Verify that version of backup image is the same as the primary firmware:
To find out what firmware version you are using, see Detailed Sys-
tem Overview page in the Web (see
section 4.4.2 ) or use the ”show
system-information” in the CLI (see section 7.3.2 ). In the example
below the primary firmware version is 4.13.4 and the backup is 4.9.2.
Example
example:/#> show system-information
System Information
===============================================================================
System Name : example
System Contact :
System Location :
System Timezone : Etc/UTC
Product Family : Lynx Model : L210
Architecture : mxc Base MAC Address : 00:07:7c:10:de:80
Article number : 3643-0105-007 Serial Number : 16975
Boot loader ver. : 4.11 Active firmware : Main
Main firmware ver. : 4.13.4 Backup firmware ver: 4.9.2
... (More info follows)
example:/#>
If the backup image is of a different version (as in the example above),
you should upgrade the backup firmware (to WeOS 4.13.4) before mov-
ing to
step 2 . To upgrade the backup firmware (to WeOS 4.13.4), ei-
ther use the Web upgrade facility, see section 7.2.1 , or use the CLI
”upgrade” command, see section 7.3.1 . The example below shows an
upgrade of the backup firmware from a FTP/TFTP server at 192.168.3.10.
➞ 2015 Westermo Teleindustri AB 87