Festo Контроллеры двигателя SFC-LAC - Manual (Page 11)

Contents and general instructions
IX
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Intended use
The single−axis field controller (Single Field Controller) type
SFC−LACI−... is used as a position controller and position servo
for the electric drives, types DNCE−...−LAS and DFME−...−LAS.
This manual deals with the basic functions of the SFC−LACI
and the DeviceNet interface of the SFC−LACI−...−DN.
The drives DNCE−...−LAS and DFME−...−LAS and additional
components are documented in separate operating
instructions.
The SFC−LACI and the connectable modules and cables may
only be used as follows:
ć as designated
ć only in industrial applications
ć in faultless technical condition
ć in original condition without modification (only the
conversions or modifications described in the
documentation supplied with the product are permitted).
· Follow the safety instructions and use all the components
and modules as described in the documentation.
· Observe also the standards specified in the relevant
chapters, as well as national and local laws and technical
regulations.
· Observe the maximum values of all additional
components (e.g. sensors, actuators).