Festo Контроллеры двигателя SFC-LAC - Manual (Page 92)

4. Control panel (only type SFC−LACI−...−H2)
4−8
Festo GDCP−SFC−LACI−DN−EN en 0812NH
4.3 [Diagnostic] menu
In order to display the system data and the currently effective
settings:
1. Select the [Diagnostic] menu in the main menu <Enter>.
2. Select a menu command <Enter>.
{ } You can scroll through the data with the arrow
keys.
ESC You can use the <Menu> key to return to the
higher−order menu.
[Diagnostic] [...] Description
[Pos. set table] Nr Number of the positioning record
a/r (e) Absolute (a) or relative (r) positioning,
(e) = energy optimised
Pos Target position
Vel Velocity
acc *) Acceleration
dec *) Deceleration (Braking)
Work load *) Applied load (= workpiece mass)
ja *) Acceleration jerk
jd *) Deceleration jerk
t_MC *) Damping time
*) After 5 s, the lower part of the display changes.
} Diagnostic
Pos.set table
Axis parameter
System paramet.
DeviceNet Diag
SW information