5 parameterising interface, Parameterising interface, N 3.5 – Festo Контроллеры двигателя SFC-LAC User Manual
Page 68
Advertising
3. Installation
3−14
Festo GDCP−SFC−LACI−DN−EN en 0812NH
3.5
Parameterising interface
Serial interface for parameterising, commissioning and
diagnosing.
Note
For connecting a PC to the SFC−LACI, use only the cable
specified in Tab. 3/2.
·
If necessary, remove the protective cap from the
parameterising interface.
·
Connect the following terminals with the programming
cable:
ć
the socket on the SFC−LACI
ć
a serial interface COMx of the PC.
M8 socket
Description
1
2
4
3
1
GND
Ground
2
RXD
RS232
1)
:
Receiving cable of PC,
transmitting cable of SFC−LACI
3
TXD
RS232
1)
:
Transmitting cable of PC,
receiving cable of SFC−LACI
4
ć
(reserved, do not use)
1)
The levels correspond to the RS232 standard.
Tab. 3/7:
Parameterising interface (RS232) of the SFC−LACI
Advertising