Festo Контроллеры двигателя SFC-LAC User Manual
Page 146
Advertising
![background image](/manuals/464472/146/background.png)
5. Commissioning
5−42
Festo GDCP−SFC−LACI−DN−EN en 0812NH
5.5.7
Examples of control and status bytes (FHPP standard)
On the following pages you will find typical examples of
control and status bytes as per FHPP standard:
1. Create readiness to operate ć Record selection
2. Create readiness to operate ć Direct mode
3. Fault handling
4. Homing run
5. Positioning using record selection
6. Direct mode: Positioning mode
7. Direct mode: Force mode
A description of the status machine of the SFC−LACI can be
found in section B.3.
Advertising