Festo Контроллеры двигателя SFC-LAC User Manual
Page 121
Advertising
![background image](/manuals/464472/121/background.png)
5. Commissioning
5−17
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Note
If the axis zero point is modified:
Existing software end positions and the target positions in
the position set table will be shifted together with the axis
zero point.
·
Teach the software end positions and the target
positions again if needed.
The project zero point PZ can only be set via FCT or
PNUĂ500Ă/ Objekt 21F4h.
Advertising