C.1 the ci interface, C.1.1 using the parameterising interface, The ci interface – Festo Контроллеры двигателя SFC-LAC User Manual
Page 339: C.1.1, Using the parameterising interface
C. CI interface
C−3
Festo GDCP−SFC−LACI−DN−EN en 0812NH
C.1
The CI interface
C.1.1
Using the parameterising interface
The parameterising interface (RS232) can be used to access
the objects of the Command Interpreter" (CI) for the
SFC−LACI. The FCT accesses the CI objects, too.
1
1
Parameterising interface (RS232)
Caution
Not using the parameterising interface as designated
causes injury to people and material damage
The parameterising interface (RS232) is
Ĉ not electrically isolated and
Ĉ not real−time capable.
It is not intended for permanent connection to PC systems
or as a controller interface.
Controlling the SFC−LACI via RS232 requires, among other
things, a risk assessment by the user, ambient conditions
free of interference and reliability of data transmission e.g.
via the control program of the higher−order control system.
·
Note that control of the SFC−LACI via the RS232 does not
comply with designated use.
·
Use the connection only for parameterising, commisĆ
sioning and diagnosis.