Festo Контроллеры двигателя SFC-LAC - Manual (Page 363)

C. CI interface
C−27
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Controller Type
CI 20E3h 00h Var uint16 rw
Description SFC−LACI−...−IO: 0x10 = without display; 0x11 = with display
SFC−LACI−...−PB: 0x12 = without display; 0x13 = with display
SFC−LACI−...−CO: 0x14 = without display; 0x15 = with display
SFC−LACI−...−DN: 0x16 = without display; 0x17 = with display
Trace Control
CI 20F2h 01 ... 0Ah Record Various
Description Settings for recording positioning procedures using the Festo Configuration
Tool (FCT)
CI Receive Checksum Active
CI 20F3h 00h Var uint8 rw
Description When checksum checking is activated, the CI commands to the SFC−LACI must
be provided with a checksum (see Tab. C/2). The checksum is calculated as per
Tab. C/5.
Example: Deactivate checksum: =20F300:0012" (12 = checksum).
The CI terminal integrated into the FCT automatically uses checksums.
Values: 0x00: deactivated (default); 0x01: activated
FCT Password
CI 20FAh 01h, 02h Array V−String rw/w
Description Management of the passwords
FCT Password 01h rw
Password for the FCT software
Value:
<........> (fixed 8 characters, ASCII, 7−bit)
Default: <00000000> (status upon delivery and after reset)
Super Password 02h w
Entering the super password.
Resets all passwords (FCT password and HMI password, object 20FB).
Contact Festo Service if you require the super password.