Festo Контроллеры двигателя SFC-LAC - Manual (Page 326)

B. Parametrizing via field bus
B−106
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Output Stage Lower Threshold Temp
PNU 1068 ć uint16 rw
Description Lower temperature threshold for SFC−LACI: 80 °C
A warning is triggered when this temperature is reached.
CI 6510h 33h uint16 rw
DeviceNet C: 107 Aā: 88 I: 1 uint16 rw
Output Stage Upper Threshold Temp
PNU 1069 ć uint16 rw
Description Upper temperature threshold for SFC−LACI: 85 °C.
When this temperature is reached, an error message is triggered. Restart only
after the temperature has dropped below the lower threshold (see PNU 1068).
CI 6510h 34h uint16 rw
DeviceNet C: 107 Aā: 89 I: 1 uint16 rw
Power Supply
PNU 1070 ć int32 rw
Description Output of power supply unit in [W]. Value range: 0 ... 3000 W. Default: 960 W.
The nominal power rating must be stated exactly.
Rounding (e.Ăg. from 960ĂW to 1000ĂW) is not permitted.
CI 6510h 50h int32 rw
DeviceNet C: 107 Aā: 57 I: 1 int32 rw
Tool Load
PNU 1071 ć uint32 rw
Description Tool load, e.g.Ăa gripper on the front plate (or piston rod) of the drive
CI 6510h 51h uint32 rw
DeviceNet C: 107 Aā: 58 I: 1 uint32 rw