Festo Контроллеры двигателя SFC-LAC - Manual (Page 133)

5. Commissioning
5−29
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Allen−Bradley Support of the Auto Device Replacement (ADR) from Allen−
Bradley.
In its master controllers, Rockwell Automation offers a special
function that supports the slave stations with automatic paraĆ
meter setting when a device is exchanged during servicing.
All of the parameters with write access addressed in the EDS
file are uploaded by the master after commissioning and
saved in the scanner of the controller. Upon network startup,
the parameter values are automatically downloaded to the
slave via Explicit Messaging. This means that devices can be
exchanged in the system without an FCT project.
Omron Support of the Autoconfigmode on Omron controllers. With
Omron controllers the DeviceNet slaves are configured by an
Autoconfig mode. A setpoint configuration via the DeviceNet
Configurator software is not necessary. The current network
configuration automatically becomes the setpoint configurĆ
ation. In addition, the scanner automatically performs an I/O
mapping.