Information on the version – Festo Контроллеры двигателя SFC-LAC User Manual
Page 17
Contents and general instructions
XV
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Information on the version
The hardware version specifies the version status of the
mechanical and electronic components of the SFC−LACI. The
firmware version specifies the version status of the operating
system of the SFC−LACI.
You can find the specifications on the version status as
follows:
ć
Hardware version and firmware version under Device
data" in the Festo Configuration Tool, when there is active
linkage to the SFC−LACI.
ć
Firmware version on the control panel under [Diagnostic]
[SW information].
Firmware
version
from
What is newā?
Which FCT PlugInā?
V 01.00
Motor controller mit DeviceNet interface
Type SFC−LACI−...−DN supports the following drives:
Ĉ DNCE−...−LAS
Ĉ DFME−...−LAS
SFC−LAC V 03.00