Festo Контроллеры двигателя SFC-LAC - Manual (Page 347)

C. CI interface
C−11
Festo GDCP−SFC−LACI−DN−EN en 0812NH
C.2 Reference CI
C.2.1 Object overview (Index, Subindex)
The following overview shows all CI objects, where
appropriate with the corresponding FHPP parameter
numbers.
Note
The following table contains an overview of the CI objects.
Some of the objects may be used only for certain product
variants or only with limitations (e.g. writing only for
service purposes). Note the detailed descriptions of the
object.
A detailed description of the CI objects can be found in
ć the FHPP parameter number PNU in the sections B.4.4 to
B.4.10,
ć if there is no PNU: under the object number in section C.3.