Festo Контроллеры двигателя SFC-LAC - Manual (Page 34)

1. System summary
1−12
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Measuring reference system 1)
REF
AZ
a
LSE USE
1 2 3 0
f
b c
PZ
d
e
g
TP/AP
REF Reference point a Offset axis zero point
AZ Axis zero point b, c Offset software end positions
PZ Project zero point d Project zero point offset
LSE Lower software end position e Effective stroke
USE Upper software end position f Nominal stroke
TP/AP Target position / Actual position g Offset TP/AP to PZ
1) Represented using the example of a drive of the DFME−...−LAS type and on the basis of the homing
method: Reference switch negative with index search. Applies to other drives as appropriate.
Tab. 1/1: Measuring reference system