Festo Контроллеры двигателя SFC-LAC User Manual
Page 132
5. Commissioning
5−28
Festo GDCP−SFC−LACI−DN−EN en 0812NH
5.4.2
Configuration of the DeviceNet master (I/O configuration")
Configuration with
EDS file
EDS files" are available for configuring the DeviceNet
master. These files are installed with the aid of the
configuration software of the DeviceNet master. The detailed
procedure can be found in the manuals for this software.
Obtainable from
The accompanying CD contains EDS files for the SFC−LACI in
the DeviceNet" folder.
You will find the latest EDS files on the Festo website at:
www.festo.com/download/
EDS file
For the SFC−LACI you will require one of the following EDS
files (in English):
Ĉ
SFC−LACI−DN_08−Revx_y.eds (= 8 bytes of I/O data) or
SFC−LACI−DN_16−Revx_y.eds (= 16 bytes of I/O data,
transmitted in 3 telegrams).
Only
one EDS file can be installed.
Ĉ
Graphics file: SFC−LACI.ico
Manual configuration
Vendor Code
26 (= 1Ah)
Product Type
12 (= 0Ch)
Product Code
9011 (decimal)
The corresponding device information can also be found in
the EDS file under [Device].