Festo Контроллеры двигателя SFC-LAC - Manual (Page 77)

3. Installation
3−23
Festo GDCP−SFC−LACI−DN−EN en 0812NH
M12 adapter FBA−2−M12−5POL (IP54)
The bus is connected via a 5−pin M12 socket with PG9 screw
connector. Use the second connection socket for the
continuation of the field bus.
Note
· Use protective caps or blanking plugs to seal unused
connections.
M12 adapter Pin no.
5
2
3
4
1
5
1
4
3
2 1. Screening
2. 24 VDC bus
3. 0 V DC bus
4. CAN_H
5. CAN_L
Protective cap or plug with bus termination
resistor if connection is not used
Bus in
Bus out
Tab. 3/9: Pin assignment of field bus interface (adapter for 5−pin M12 connection)
With the two M12 connections you can implement a
T−adapter.