Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 142)

Network Manager Configuration MN/22156, rev 12
3-42 VMS User Guide
Figure 3-40 Create Network menu command
2. In the Create Nework dialog that opens (figure 3-41), enter a Network
Name and click OK.
Figure 3-41 Create Network dialog
3. Expand the Network Manager view to expose the new Network container
icon.
4. Repeat the above steps to create additional network containers, as required
by the Administrator’s Network Plan.
Create Groups
Group containers are optional and are used to help organize very large network
structures, providing an intermediate level between the Network and its Site
containers. For networks that will not utilize this feature, proceed to the follow-
ing section, Add Network/Group Satellite(s).
1. Select Create Group from the Network drop-down menu, as shown in
figure 3-42.