Offset (frequency), Offset (frequency). . . . . . . . . . . f-12, Figure f-7 example vs oids – Comtech EF Data VMS v3.12.x Vipersat User Manual
Page 510: Figure f-8 dynamic parameters, cdm-840
Advertising
Operational Procedures
MN/22156, rev 12
F-12
VMS User Guide
Figure F-7 Example VS OIDs
The example below shows a step through of CDM-840 dynamic parameters.
Figure F-8 Dynamic Parameters, CDM-840
Offset (Frequency)
The demodulator acquisition frequency offset is in two parts, one from the
demodulator at the Remote receiver and the other from the coordinated or asso-
ciated (switched) demodulator at the Hub. The outbound receiver offset is a
pass-through not cached, whereby the proxy forwarder sends the request to the
Remote agent.
Advertising