Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 422)

VMS Redundancy MN/22156, rev 12
C-12 VMS User Guide
Figure C-7 Activate Command, VMS Server Menu
9. From the Active VMS server, select the Synchronize command from the
Server drop-down menu to force the Standby server(s) to synchronize with
the current status of the Active server.
This manual synchronization command must be executed whenever a
Standby server is started or comes back into the group, as well as whenever
any database changes are made to a unit. A synchronization can only be exe-
cuted from the Active server.
Figure C-8 Synchronize Command, VMS Server Menu