Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 485)

Appendix E - Automatic Switching E-29
MN/22156, rev 12 Entry Channel Mode Switching
CDM-570/L and the SLM-5650A; the UI page appearances may differ,
however.
Figure E-17 STDMA Page with Entry Channel Mode, CDM-570/570L
Switching an ECM Remote from SCPC to STDMA
Use the following procedure to switch an ECM Remote operating in SCPC
mode back to STDMA mode.
Note: This switch must be performed manually.
1. Click the Remote List menu item on the STDMA page shown in
figure E-17 above to display the STDMA Remote List shown in
figure E-18.
NOTE