Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 292)

Status and Control MN/22156, rev 12
5-4 VMS User Guide
Additional status information is displayed in the bottom window panel, includ-
ing device connection status, device type, and unit IP address.
ROSS Control Menu
The control settings of any Vipersat network ROSS can be configured or modi-
fied using the VMS. Right-clicking on a device icon in ViperView will display
a drop-down menu showing the options that can be exercised for the device, as
shown in figure 5-2.
Figure 5-2 ROSS Command Menu
The following describes the actions for each item/command on the ROSS drop-
down menu.
Open
This command opens a separate ViperView window displaying the Status View
for the unit.