Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 336)

VMS Service Managers MN/22156, rev 12
6-30 VMS User Guide
Figure 6-36 Application Policies, Remote Site
Distribution Lists
Distribution Lists are used to define multiple target subnets for point-to-multi-
point distribution on an InBand service connection whenever an upstream
switch to a specific destination IP address occurs, such as to a multicast address.
Distribution lists are typically created, modified, or disabled at the site level to
accommodate specific site requirements. However, they can also be created at
the group and network levels where they become inherited by the associated
sites, just as with Application Policies.
In the Distribution Lists table, the user can Insert, Modify, and Remove lists,
then either select or de-select these lists once entered through the use of the
check boxes (figure 6-37).