Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 477)

Appendix E - Automatic Switching E-21
MN/22156, rev 12 ToS Switching
Example Implementations
ToS Switching Per Device
For applications that require an increase in SCPC bit rate for each application
device, a separate ToS value must be assigned to each device individually. This
provides granular switching for each device and also allows a mesh connection
to be established for each device independently. Figure E-11 depicts a per
device configuration example.
Figure E-11 Per Device ToS Switching Example
ToS Switching Per Traffic Type
For applications that only require a single SCPC bit rate, regardless of the
number of active application devices, the same ToS value can be assigned to
each device. This method does not provide granular switching for each device
and a mesh connection will only be set up for the first device that sends packets
with the designated ToS value. Figure E-12 depicts a per traffic type configura-
tion example.