Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 43)

Chapter 2 - VMS Installation 2-3
MN/22156, rev 12 General
Figure 2-2 Windows Update, Change Settings window
3. Select the update setting from the drop-down menu, then click OK.
Types of Installation
The VMS can be installed in three different configurations:
1. On a single VMS server; Vipersat Management System Service.
2. On two or more (N:1) VMS servers in the optional fault-tolerant, redundant
configuration; Vipersat Management System Service.
3. On a client workstation; ViperView User Interface.
Server installations can be performed as either:
• Clean Installation - An installation on a server that has not previously
operated as a VMS server, or that has had its hard drive re-formatted. With
no existing network database, a full network configuration (Chapter 3,
“VMS Configuration”) must be performed following installation.