Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 75)

Chapter 2 - VMS Installation 2-35
MN/22156, rev 12 ViperGlobe Installation
ViperGlobe Installation
ViperGlobe is an optional VMS application program that is installed on the
VMS Client workstation. This workstation must have the necessary supporting
video graphic hardware that is required to run this application. ViperGlobe will
install in the same directory as the VMS Client.
Note: To run the ViperGlobe application, it is necessary to have a video
graphics card that supports a minimum of 256 MB of video memory and
supports Pixel Shader Model 2.0 - 3.0 (reference NVIDIA
TM
Graphics
Card family, 7000 series or equivalent).
Installation Procedure
1. Locate the VMS 3.x Globe Setup.exe file in the VMS distribution directory
(on CD or Web download) and double-click on the file to start the installer.
This will open the Vipersat Network Globe Setup Wizard (figure 2-40) that
will install the ViperGlobe application.
Figure 2-40 Vipersat Network Globe Setup Wizard
2. Click the Next button to progress through the Setup process.
3. Specify the Start Menu Folder for locating the program shortcut. This
folder defaults to the folder that was specified for the VMS Client installa-
tion.
NOTE