Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 273)

Chapter 4 - Configuring Network Modems 4-55
MN/22156, rev 12 Network
• Switch Type – Enter an integer value in the range of 64 to 254 at the
prompt to inform the VMS what switching policy to use. Entering a value
of 0 will result in no switch.
• SCPC Rate – Enter the desired data rate for switching on this service
type. Valid entries are from 0 to 155000000 bps. This setting will override
the VMS set policy value.
• SCPC Timeout – This timer monitors the defined packet flow. Once data
stops for the duration of the timer setting, the link state will be restored to
the Home State condition for this Remote. Valid entries are from 1 to 60
seconds.
After field entry, clicking the OK button will update the ToS Switch Rules table
with the new configuration. Note that the Add Type of Service Rule dialog
remains open after adding a rule so that additional rules can be added easily.
Click the Cancel button to return to the ToS dialog.
When one or more rules that appear in the table list are selected, the Modify
Entry and Delete Entry buttons become active.