Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 192)

Network Manager Configuration MN/22156, rev 12
3-92 VMS User Guide
Figure 3-100 Select Return Path Modulator, InBand Switching
7. If required, set the Priority to be assigned to this site.
Note that a lower number corresponds to a higher priority level. The default
value (0) equates to No priority.
8. To configure this site for Point-to-Point Switching, Enable the check box
and then select the Forward Path Demodulator (the demod for this Remote
data unit) to be used for this feature (figure 3-101).