Figure 3-115 adding site, network manager, Figure 3-116 adding network site, viperglobe – Comtech EF Data VMS v3.12.x Vipersat User Manual
Page 205
Advertising
Chapter
3 -
VMS Configuration
3-105
MN/22156, rev 12
Network Manager Configuration
•
ViperGlobe—Right-click on the desired geographic location on the globe
and select the Create Site command from the drop-down menu
(figure 3-116).
This method approximates the site coordinates for latitude and longitude
based on the point where the mouse click occurs. The coordinates
corresponding to the mouse position appear in the top center of the
window as a reference.
Figure 3-115 Adding Site, Network Manager
Figure 3-116 Adding Network Site, ViperGlobe
Advertising