Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 161)

Chapter 3 - VMS Configuration 3-61
MN/22156, rev 12 Network Manager Configuration
18. Select the Remote demodulator for this site by clicking on the Select button
for Managed Demodulator.
19. In the Select Object window that opens, double-click on the Antenna icon
for this Remote site to view the associated demods (figure 3-68).
20. Select the Demodulator for this site’s data modem and click OK to enter it
into the Forward Path Settings dialog.
Figure 3-68 Select Remote Demodulator
21. Next, select the Hub modulator for this site by clicking on the Select button
for Home Modulator.
22. In the Select Object window that opens, double-click on the Antenna icon
for the Hub site to view the associated mods (figure 3-69).
23. Select the Modulator for this site’s TDM (typically the Hub Controller,
unless another modem is designated for the TDM) and click OK to enter it
into the Forward Path Settings dialog.