Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 157)

Chapter 3 - VMS Configuration 3-57
MN/22156, rev 12 Network Manager Configuration
Figure 3-61 Select Remote Modulator
9. Next, select the Hub demodulator for this site by clicking on the Select
button for Home Demodulator.
10. In the Select Object window that opens, double-click on the Antenna icon
for the Hub site to view the associated demods (figure 3-62).
11. Select the Demodulator for this site’s Hub Controller and click OK to
enter it into the Return Path Settings dialog.
Figure 3-62 Select Uplink Demodulator
Note: As soon as the Home Demodulator is chosen, a yellow alert icon
appears next to the Additional Transmission Parameters field in the
Home State box, as well as the Return Path Settings menu item. Click-
ing on the icon reveals a message warning that the current parmeters for
this field (none) are not valid for the Home Device that has been
selected.
NOTE