Comtech EF Data VMS v3.12.x Vipersat - Manual (Page 360)

SNMP Modem Manager MN/22156, rev 12
7-4 VMS User Guide
SNMP Modem Manager
The SNMP Modem Manager is the controlling service for all non-Vipersat Out-
of-Band modems. This service is the communications conduit between the
modems and the VMS, and provides the modem parameter configuration inter-
face for these units.
Right-clicking on the manager icon opens a menu with commands to Open the
manager, Declare Modem, and view the manager Properties. The procedure for
configuring SNMP modems is presented below.
Set SNMP Timing Intervals
1. To set the manager Timing Intervals, right-click on the SNMP Modem
Manager to display the drop-down menu shown in figure 7-1.
Figure 7-1 SNMP Modem Manager command menu
2. Select the Properties command to open the Properties page, shown below in
figure 7-2.