Figure 3-108 return path modcod table, create, Remote – Comtech EF Data VMS v3.12.x Vipersat User Manual
Page 198
Advertising
Network Manager Configuration
MN/22156, rev 12
3-98
VMS User Guide
Figure 3-108 Return Path ModCod Table, Create Remote...
16. Here, the user can modify/remove reference site entries that are displayed,
and/or insert new ones. Configure the modcods as required for this site, then
click Next.
For Point-to-Point sites, the Forward Path ModCod Table dialog will
appear. Configure as required.
Proceed to the Site Wizard Ready to Create summary page (figure 3-109)
by clicking Next.
Advertising