Texas Instruments TMS320C3x - Manual (Page 611)

Parallel MPYF3 and STF MPYF3||STF
13-153 Assembly Language Instructions
Syntax MPYF3 src2, src1, dst
|| STF src3, dst2
Operation src1
×
src2
→
dst1
|| src3
→
dst2
Operands src1 register (R n1, 0
≤
n1
≤
7)
src2 indirect ( disp = 0, 1, IR0, IR1)
dst1 register (R n3, 0
≤
n3
≤
7)
src3 register (R n4, 0
≤
n4
≤
7)
dst2 indirect ( disp = 0, 1, IR0, IR1)
This instruction’s operands have been augmented in the following devices:
- ’C31 silicon revision 6.0 or greater
- ’C32 silicon revision 2.0 or greater
src1 register (R n1, 0
≤
n1
≤
7)
src2 indirect ( disp = 0, 1, IR0, IR1) or any CPU register
dst1 register (R n2, 0
≤
n2
≤
7)
src3 register (R n3, 0
≤
n3
≤
7)
dst2 indirect ( disp = 0, 1, IR0, IR1)
Opcode
31 24 23 16 8 7 0 15
1 1 0 1 1 1 dst1 src2 dst2 1 src1 src3
Description A floating-point multiplication and a floating-point store are performed in paral-
lel. All registers are read at the beginning and loaded at the end of the execute
cycle. If one of the parallel operations (MPYF3) writes to a register and the op-
eration being performed in parallel (STF) reads from the same register, then
STF accepts the contents of the register as input before it is modified by the
MPYF3.
If src2 and dst2 point to the same location, src2 is read before the write to dst2.
Cycles 1