Texas Instruments TMS320C3x - Manual (Page 663)

Rotate Left Through Carry ROLC
13-205 Assembly Language Instructions
Syntax ROLC dst
Operation dst left-rotated one bit through carry bit
→
dst
Operands dst register (Rn, 0
≤
n
≤
27)
Opcode
31 24 23 16 8 7 0 15
0 0 0 1 0 0 1 0 0 dst 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Description The contents of the dst operand are left rotated one bit through the carry (C)
bit and loaded into the dst register. The MSB is rotated to the carry bit at the
same time the carry bit is transferred to the LSB.
Rotate left through carry bit:
C dst
Cycles 1
Status Bits These condition flags are modified only if the destination register is R7– R0.
LUF Unaffected
LV Unaffected
UF 0
N MSB of the output
Z 1 if a 0 output is generated; 0 otherwise
V 0
C Set to the value of the bit rotated out of the high-order bit; if dst is not
R7–R0, then C is shifted into the dst but not changed
OVM Operation is not affected by OVM bit value.
Example 1 ROLC R3
Before Instruction After Instruction
R3 00 0000 0420 R3 00 0000 0841
LUF 0 LUF 0
LV 0 LV 0
UF 0 UF 0
N 0 N 0
Z 0 Z 0
V 0 V 0
C 1 C 0
Mode Bit