Festo Электромотор MTR-DCI - Manual (Page 127)

5. Commissioning
5-29
Festo P.BE-MTR-DCI-DN-EN en 1209a
Allen-Bradley Supporting Auto Device Replacement (ADR) from Allen-
Bradley.
The master controllers from Rockwell Automation offer a
special function, which supports automatic parameter set-
ting of slave participants when a device is swapped for
servicing. All writable parameters addressed in the EDS file
are uploaded by the master after commissioning and stored
in the controller scanner. When the network is started,
Explicit Messaging is used to automatically download the
parameter values into the slave(s). This allows plant devices
to be swapped without an FCT project.
Omron Supporting the Auto-config mode of Omron controllers.
With Omron controllers, the DeviceNet participants are
configured using an Auto-config mode. Configuration of
nominal values using the DeviceNet configuration software
is not required. The current network configuration automati-
cally becomes the nominal configuration. The scanner also
independently performs an I/O mapping.