Festo Электромотор MTR-DCI - Manual (Page 91)

4. The control panel (type MTR-DCI-...-H2 only)
4-17
Festo P.BE-MTR-DCI-DN-EN en 1209a
4.5.1 [Settings] [Axis type]
Selection of the axis driven by the MTR-DCI
[Axis type] Description
[Type DMES-...] Festo servo axis
[Type DNCE-...] Festo electrical drive
[Rotation drive] Specific rotation axis
[User config] Specific linear axis
Tab. 4/6: [Settings] [Axis type] menu
<- -> You use the arrow buttons to set the axis-specific
properties in accordance with the display prompts,
e.g. feed constants, units of measurement, or
counting direction. (for details, see chapter 5.2.1)
SAVE Pressing the <Enter> button permanently saves the
settings in an EEPROM.
ESC Pressing the <Menu> button cancels the action and
returns you to the higher menu level.
• Press SAVE <Enter> to save your settings.