Festo Электромотор MTR-DCI - Manual (Page 241)

B. Reference – Festo DeviceNet and FHPP
B-19
Festo P.BE-MTR-DCI-DN-EN en 1209a
Device Control
FHPP 125 – Var uint8 rw
Description Activates device control of the controller via the controller interface.
Corresponds to “HMI control” on the control panel and “FCT/HMI” in the FCT.
0 (0x00): Control via control interface OFF,
via HMI (control panel) and FCT ON
1 (0x01): Control via controller interface OFF (default)
CI 207Dh 00h Var uint8 rw
DeviceNet 64h 01h 0Eh uint8 rw
HMI Control
FHPP 126 1...4 Var uint8 ro
Description Settings for the HMI control panel (for MTR-DCI-...-H2 only)
Only affects the values in the display: all parameters are stored in increments.
LCD Current
(LCD voltage)
126 1 0 ro
Value range: 1...5 (0x01 ... 0x05). Default: 5
LCD Contrast 126 2 1 ro
Value range: 0...63 (0x00 ... 0x3F). Default: 0
Measuring unit 126 3 2 CI: rw
Measuring unit system for the control panel. See object 20D0h.
1 (0x01): metric units of measurement (mm, mm/s, mm/s
2 )
4 (0x04): angular degrees
8 (0x08): revolutions
Scaling Factor 126 4 3 CI: rw
Number of decimal places. Fix = 2. See object 20D0h
CI 20FFh 01h...04h Array uint8 rw
DeviceNet 64h 01h 0Fh...12h uint8 rw