Festo Электромотор MTR-DCI - Manual (Page 16)

Contents and general safety instructions
XIV
Festo P.BE-MTR-DCI-DN-EN en 1209a
Description of MTR-DCI motor unit
This description contains information on the mode of
operation, as well as on assembly, installation and
commissioning of electric valve actuators with motor
unit type MTR-DCI-...-DN (DeviceNet interface).
Information´on additional components, e. g. the reference
switches, can be found in the operating instructions supplied
with the product in question.
Type Designation Content
Operating package with
brief description and
descriptions (and
commissioning software)
on CD-ROM P.BP-MTR-DCI Brief description: important instructions
on commissioning and preliminary
information
Descriptions on CD-ROM: contents as
described below
Description Motor unit of type MTR-DCI
with DeviceNet interface
P.BE-MTR-DCI-DN-... Installation, commissioning and
diagnosis of electric drives with MTR-DCI
motor unit; communication via the
DeviceNet interface.
Help system for software Festo Configuration Tool
help (contained in FCT
software) Function description of the Festo
Configuration Tool (FCT) configuration
software
Operating instructions, if
present Drives
e.g. DMES-... / DNCE-... Fitting and commissioning the drives
Further manuals Motor unit MTR-DCI with
other communications
interfaces e.g.
P.BE-MTR-DCI-IO-...
P.BE-MTR-DCI-CO-...
P.BE-MTR-DCI-PB-... Installing, commissioning and diag-
nosing electric axes with motor con-
troller type MTR-DCI with communica-
tion via I/O interface or via the relevant
Fieldbus.
Table 0/1: Documentation on the MTR-DCI