Festo Электромотор MTR-DCI - Manual (Page 245)

B. Reference – Festo DeviceNet and FHPP
B-23
Festo P.BE-MTR-DCI-DN-EN en 1209a
Diagnostic Memory Parameter
FHPP 204 1...4 Array uint8 rw/ro
Description Configuration of the diagnostic memory.
Fault Type 204 1 uint8 rw
Incoming and outgoing faults
1 (0x01): Record incoming and outgoing
*) faults (default)
2 (0x02): Record only incoming faults
*) Outgoing fault = time when the fault was acknowledged.
Resolution 204 2 uint8 rw
Resolution time stamp.
1 (0x01): Time stamp resolution 10 ms (default)
2 (0x02): Time stamp resolution 1 ms
Clear Memory 204 3 uint8 rw
Deletes diagnostic memory by writing value = 1.
Read will always be answered with value = 1.
Number of Entries 204 4 uint8 ro
Reads out the number of entries in the diagnostic memory.
Value range: 0 ... 15 (0x00 ... 0x0F)
CI 20CCh 01h...04h Array uint8 rw/ro
DeviceNet 66h 01h 01h...04h uint8 rw/ro
Device Error
FHPP 205 – Var uint16 rw
Description Read or clear the active device fault.
Read [bit 0...15]: see section 6.3, Tab. 6/6.
Write 0 (0x0000): Delete the active device fault.
CI 2FF1h 00h Var uint16 rw
DeviceNet 6Ch 01h 01h uint16 rw