Festo Электромотор MTR-DCI - Manual (Page 78)

4. The control panel (type MTR-DCI-...-H2 only)
4-4
Festo P.BE-MTR-DCI-DN-EN en 1209a
4.1 Composition and function of the control panel
1
LC display
2
Operating
buttons
3
LEDs
– Power (green)
– I/F (green/red)
– Error (red)
1 3 2
Fig. 4/1: Control panel of the MTR-DCI-...-H2-...
LC display The graphical LCD (128 x 64 pixels) shows all text in English.
The display can be rotated if required; see the menu
commands [LCD adjustment].
Membrane keyboard The 4 buttons on the membrane keyboard are used to
perform menu-driven settings and commissioning functions:
– Parameter assignment and referencing the axis
– Teaching of standard applications and editing of posi-
tioning sets
– Execution/Testing of individual positioning sets.
LEDs The operating statuses are indicated visually by 3 LEDs
(see also chapter 6.2):
– Power: Power supply
– I/F: Bus status (Network, Module)
– Error: Faults