Festo Электромотор MTR-DCI - Manual (Page 51)

2. Mounting
2-3
Festo P.BE-MTR-DCI-DN-EN en 1209a
2.1 General instructions
Warning
Danger of electric shock, short circuiting or unexpected
drive motion!
• Always switch off all power supply before carrying out
mounting, installation and maintenance work.
Note
Handle all modules and components with great care. Note
especially the following:
– Screw connections must be fitted free of distortion and
mechanical tension. Screws must be fitted accurately
(otherwise threads will be damaged).
– The specified torques must be observed.
– The modules must not be offset from one another.
– Contact surfaces must be clean (avoid contact faults).