Festo Электромотор MTR-DCI - Manual (Page 297)

C. The Command Interpreter (CI)
C-23
Festo P.BE-MTR-DCI-DN-EN en 1209a
Controller Type
CI 20E3h – Var uint8 rw
Description Type of controller.
Values: 0 = without display; 1 = with display.
CI_ReceiveChecksumActive
CI 20F3h 00h Var uint8 rw
Description Enable checksum checking of received CI telegrams, see section C.1.2,
Tab. C/2.
Values:
0 (0x00): disabled (default)
1 (0x01): enabled
Example: deactivate checksum: “=20F300:0012” (12 = checksum)
Password
CI 20FAh 01h, 02h Array V-string rw/ro
Description For managing the FCT password, entering the super password.
FCT Password 20FAh 01h V-string rw
Password for the FCT software
Value:
<........> (fixed: 8 characters, ASCII, 7-bit)
Default: <00000000> (status upon delivery and after reset)
Super Password 20FAh 02h V-string ro
For entering the super password.
Resets all passwords (FCT password and HMI password, object 20FB). Contact
Festo Service if you require the super password.
Local Password
CI 20FBh 00h Var V-string rw
Description For managing the (local) HMI password to enable particular functions that can
be carried out via the control panel.
Value:
<........> (fixed: 8 characters, ASCII, 7-bit)
Only the first 3 characters are evaluated.
Default: < 00000000> (status upon delivery and after reset)