Festo Электромотор MTR-DCI - Manual (Page 96)

Enter Password:
[?xx] =
ESC <Menu>
EDIT <--> OK <Enter>
Enter Password:
[?xx] =
ESC <Menu>
EDIT <--> OK <Enter>
New Password:
[?xx] =
ESC <Menu>
EDIT <--> OK <Enter>
4. The control panel (type MTR-DCI-...-H2 only)
4-22
Festo P.BE-MTR-DCI-DN-EN en 1209a
Entering a password
As soon as a password is active, it will be scanned automati-
cally when the menu commands [Positioning], [Settings] or
[HMI control] are accessed.
The current entry position is marked with a question mark.
1. Use the arrow buttons to select a digit 0...9.
2. Confirm your entry with <Enter>. The next entry position
will be displayed.
3. Repeat the entry for the remaining entry positions.
When the correct password is entered, all parameterising and
control functions of the control panel are enabled until the
power supply is switched off.
Modifying/deactivating the password
Select [Settings] [Password edit] in the menu:
Enter the current password with 3 digits (0..9).
The current entry position is marked with a question mark.
1. Set the first digit of the password using the arrow
buttons.
2. Confirm the digit with OK <Enter>.
3. Set the digit for the next input position “?”.
After entering the third digit of the current password you
can change or deactivate the password.
Enter 3 digits for the new password or enter “000” to
deactivate the password:
4. Use the arrow keys to select the first digit.