Festo Электромотор MTR-DCI - Manual (Page 40)

1. System overview
1-18
Festo P.BE-MTR-DCI-DN-EN en 1209a
Warning
For the purposes of your EMERGENCY STOP procedures,
check what measures are necessary for switching your
system into a safe state in the event of an EMERGENCY
STOP.
• If an EMERGENCY STOP circuit is required for your
application, use additional, separate safety limit
switches (e.g. as normally closed series-connected
switches)
– for cancelling the ENABLE signal at the control inter-
face,
– or for switching off the load voltage.