Festo Электромотор MTR-DCI - Manual (Page 82)

4. The control panel (type MTR-DCI-...-H2 only)
4-8
Festo P.BE-MTR-DCI-DN-EN en 1209a
4.3 [Diagnostic] menu
For displaying the currently active settings of the position set
table, axis and system parameters, status and diagnostic
information on bus communication, and the firmware version:
1. From the main menu, select the [Diagnostic] menu.
2. Select a menu command (see Tab. 4/4).
<- -> You can page through the data using the arrow
buttons.
ESC Pressing the <Menu> button returns you to the
higher menu level.
} Diagnostic
Pos.set table
Axis parameter
System paramet..
DeviceNet Diag
SW information