Festo Электромотор MTR-DCI - Manual (Page 108)

5. Commissioning
5-20
Festo P.BE-MTR-DCI-PB-EN en 1209a
position set with speed v = 0, neither this position set
record nor the following records will be executed; the
positioning cycle will continue from the first position set
record.
4. Start the test run.
Note
With EMERG.STOP <Menu> you can interrupt the current
positioning procedure.
With DEMO STOP <Enter> you can interrupt the positioning
cycle [Demo posit tab]. The current position set will be ex-
ecuted before the drive stops.
• Check the positioning behaviour.
• Check the position details displayed.
5. If necessary, optimise the settings for position sets, and
also (if needed) for the points of reference and the work-
ing range.