Festo Электромотор MTR-DCI - Manual (Page 77)

4. The control panel (type MTR-DCI-...-H2)
4-11
Festo P.BE-MTR-DCI-PB-EN en 1209a
[PROFIBUS Diag] Menu command for displaying the following PROFIBUS dia-
gnostics data:
[PROFIBUS
Diag] Description
ConState Configuration status.
– WaitPrm: Waiting for parameter assignment
– WaitCfg: Waiting for configuration
– DataEx: Data exchange
Bit rate Current bit rate
MasterAdr Address of the master
SlaveAdr Address of the MTR-DCI-...-PB
ActCFG Current bus configuration.
– invalid:
No configuration or incorrect configuration
by master (e.g. by invalid GSD file)
– FHPP Std.:
Control via control bytes
– FHPP FPC:
Control via control bytes, parameter assign-
ment via the parameter channel
GbDiagnosis Device-related diagnosis.
– ON: If there is a fault, request for diagnosis
will be sent.
– OFF: If there is a fault, request for diagnosis
will not be sent.