Festo Электромотор MTR-DCI User Manual
Page 30
Advertising
1. System overview
1-10
Festo P.BE-MTR-DCI-PB-EN en 1209a
Warning
•
Check the measures which are required within the
framework of your EMERGENCY OFF circuit for switching
your system into a safe state in the event of an EMER-
GENCY STOP.
•
If corresponding EMERGENCY OFF circuitry is necessary
for your application, use additional, separated safety
limit switches (e.g. as normally closed limit switches
wired in series connection)
– For disconnecting the ENABLE signal at the controller
interface,
– For switching off the load voltage as needed.
Advertising